User's Manual

15/18
l Press and hold the PTT button (The LED light red during transmission.)
l Speak slowly and clearly
l To Stop the transmission, release the PTT button.
l If there is no more receiving signal for 5 seconds, the unit will go into
power save mode.
11) Receiving
The Coding feature reduces the possibility of interference and provide
enhanced Communication. You can only listen to a call which has correct
matching codes.
** Upon receiving a signal, the LED will light green. In case that a signal, which
has different CTCSS channel, is received when the Radio is on the CTCSS mode,
the LED blinks in green.
Important :
Before transmitting or receiving, the users have to make sure that the correct
channel ( 1 to 15 ) and code ( 00 to 38 ) are selected.
12) Channel Scanning
This feature allows you to monitor all activated channels while scanning.
To activate the Scan
l Press the SCAN button
l Radio will begin scanning.
l When in scan mode, the display will show each scanning channel.
l After an activated channel is scanned, a signal will be received. If there is
no more signal, the scan will resume automatically.
** If a channel is scanned, a user can resume the scan by pressing the monitor
button.
13) Call
l Click the PTT button twice quickly.
14) Monitoring the Channel
It is used to check activity on the current frequency before transmitting.
To activate the monitor feature
l Press and hold the “M”(monitor) button for over two seconds.
l You will hear static if frequency is clear.
( The monitor icon will appear on the LCD.)
To disable the monitor feature