User's Manual

14/18
l Press the Up or Down button to toggle between the Hi or Lo selections.
l Press the PTT button momentarily to confirm selection.
6)Roger tone
This feature will give the tone signal to other parties when transmitting is
finished
(when PTT button is released.)
To activate or disable the Roger tone
l Press the Mode button until [rb On or oF] and the roger icon blink on the
LCD.
l Press the up[
]or down[ ] button.
l Press the PTT button or MODE button to confirm.
7) Beep tone
Hearing this tone, users will make sure that any button has been correctly
pressed.
To set the beep tone
l Press the Mode button until [bP On or oF] and the BELL icon blink on the
LCD.
l Press the up[

] or down[

] button.
l Press the PTT button or MODE button to confirm.
8) Call Ringer Selection Mode
This feature Provides 3 user selectable call ringer signal.
To set your favorite call ringer signal.
l Press the MODE button until the [C
01
or up to
03
] appears on the LCD.
l Press the up[ ] or down[ ] button to select the call melody type.
l Press the PTT button to confirm.
l To activate the call, click the “PTT” button twice quickly.
9) Out-of-range Alarm
Icon blinks as the receiving signal is getting weaker. The Icon stops blinking
when the receiving signal comes back to normal strength.
10) Transmitting