User's Manual

13/18
codes, switch your unit to the same channel with the sub-code setting
to OFF.
3) VOX (Voice Operated Switching)
This option enables you to have hands-free conversation. You do not have to
operate the PTT button each time when you want to transmit.
You can also choose the VOX sensitivity suit your environment of operation.
( Ex : noisy road, motor bike, factory etc. )
To Set the VOX mode
l Press the MODE button until the [Uo
oF
or
XX
] appears. XX is a vox level
l VOX icon will be appeared on the LCD.
To set the VOX level
l Press the up[

] or down[

] button to set the VOX level from 1 to 5.
“oF” is disable the VOX function.
“01” is least sensitive.
“05” is most sensitive.
l Press the PTT button or MODE button to confirm.
4) Setting the DW (dual watch)
To set the DW mode
l Press the MODE button until the [ oF of 01 up to 15] and DW icon blink
on the LCD.
l DW icon will appear on the LCD.
To set the dual watch(DW) channel
l Press the up[

] or down[

] button to choose the channel.
“oF” means no DW mode.
“01 up to 15” means the channel is dual-watched.
l Press the PTT button or MODE button to confirm.
5) Power Selection Mode
This feature permits selection of the transmitting power level to high or low.
Using low power, the unit will have a lower transmit range but battery life will
Be increased.
To access the transmitter power selection function
l Press the MODE button until the Po icon appears with a flashing Hi or Lo
indication on the display.