User's Manual

13/17
To set the dual watch(DW) channel
!
Press the up[
″
]or down[
…
] button to choose the channel.
“
oF
” means no DW mode.
“
01
up to
15
” means the channel is dual-watched.
!
Press the PTT button or MODE button to confirm.
5) Power Selection Mode
This feature permits selection of the transmitting power level to high or low.
Using low power, the unit will have a lower transmit range but battery life will
Be increased.
To access the transmitter power selection function
!
Press the MODE button until the Po icon appears with a flashing Hi or Lo
indication on the display.
!
Press the Up or Down button to toggle between the Hi or Lo selections.
!
Press the PTT button momentarily to confirm selection.
6)Roger tone
This feature will give the tone signal to other parties when transmitting is
finished
(when PTT button is released.)
To activate or disable the Roger tone
!
Press the Mode button until [
rb On
or
oF
] and the
roger
icon blink on the
LCD.
!
Press the up[•]or down[•] button.
!
Press the PTT button or MODE button to confirm.
7) Beep tone
Hearing this tone, users will make sure that any button has been correctly
pressed.
To set the beep tone
!
Press the Mode button until [
bP On
or
oF
] and the
BELL
icon blink on the
LCD.
!
Press the up[
″
]or down[
…
] button.
!
Press the PTT button or MODE button to confirm.
8) Call Ringer Selection Mode
This feature Provides 3 user selectable call ringer signal.