User's Manual

12/17
GMRS-7000 has 15 main channels and 38 sub-channels.
!
14 Frequency channels
!
38 CTCSS Code ( indicated by CTC icon on the LCD )
To select the channel
!
Turn the radio on.
!
Press MODE button once, [XX] digit will blink on the LCD. XX is a
channel.
!
Press up[
″
]or down[
…
] button to choose the channel.
!
Press the PTT button or MODE button to confirm.
To set the tone codes(CTCSS)
!
Press MODE button once more, [
XX
oF, 01
up to
38
] will appear and CTC
icon and tone code digit will blink on the LCD. “oF” means no CTCSS
code.
!
Press up[
″
]or down[
…
] button to choose the desired sub-channel to use.
!
Press the PTT button or MODE button to confirm.
NOTE :
To communicate with other GMRS/FRS units, they must
be switched to
the same channel and CTCSS sub-code. To
communicate
with other GMRS/FRS units which do not have sub-
codes, switch your unit to the same channel with the sub-code setting
to OFF.
3) VOX (Voice Operated Switching)
This option enables you to have hands-free conversation. You do not have to
operate the PTT button each time when you want to transmit.
You can also choose the VOX sensitivity suit your environment of operation.
( Ex : noisy road, motor bike, factory etc. )
To Set the VOX mode
!
Press the MODE button until the [
Uo
oF
or
XX
] appears.
XX
is a vox level
!
VOX
icon will be appeared on the LCD.
To set the VOX level
!
Press the up[
″
]or down[
…
] button to set the VOX level from 1 to 5.
“
oF
” is disable the VOX function.
“
01
” is least sensitive.
“
05
” is most sensitive.
!
Press the PTT button or MODE button to confirm.
4) Setting the DW (dual watch)
To set the DW mode
!
Press the MODE button until the [
oF of 01
up to
15
] and
DW
icon blink
on the LCD.
!
DW icon will appear on the LCD.