User's Manual

the LCD.
* DW icon will appear on the LCD.
To set the dual watch(DW) channel
* Press the up[ù]button or down [ü]button to choose the channel.
“oF” means no DW mode.
“01 up to 22” means the channel that is dual-watched.
* Press the PTT button or MODE button to confirm.
6) Roger tone
This feature will give the tone signal to other parties when transmitting finished
(when PTT button is released.)
To activate or disable the Roger tone
* Press the Mode button until [rb on or oF] and the roger icon blink on the
LCD.
* Press the up[ù]button or down [ü]button.
* Press the PTT button or MODE button to confirm.
7) Beep tone
To set the beep tone
* Press the Mode button until [bP on or oF] and the BELL icon blink on the
LCD.
* Press the up[ù]button or down[ü] button.
* Press the PTT button or MODE button to confirm.
8) Setting ID code
To set the Caller ID
* Press the MODE button until the ID Icon and small segment display blinks.
* Then press the Up or Down button to select the desired ID number from 01 to
10. “oF” means no ID mode.
* Press the PTT button or Mode button momentarily to confirm the ID number.
** When a signal is received from the radio where the one Caller ID is selected,
the radio that is receiving the signal displays the Caller ID number of the
transmitting radio.