User's Manual

GMRS-2000
Instruction Manual
01-03-09
- 7 -
4) Monitoring the channel
It is used for listening the weak signal or to here all activities on the channel by manually overriding
channel code setting.
To activate the Monitor feature
!
Press and hold the
MON
button for over two seconds.
!
When you here the sound, release the
MON
button.
To disable the Monitor feature
!
Press and hold the
MON
button for over two seconds.
5) Auto Channel Scanning
This feature allows you to monitor all channels automatically for valid signal. It does this by scanning all
the pre-assigned channels in sequential order and checking for correct matching code.
You can find all the channels which will be scan with icon
SCAN
on the LCD.
To activate the Scan
!
Press the Scan button
!
Radio will begin scanning for an active pre-assigned channels only.
While scan, you can transmit and receive. It will return to scan mode after transmitting & receiving is
finished then after 5 seconds
6) Transmitting
!
Press and hold the PTT button (The red LED will be illuminated)
!
Speak slowly and clearly
!
To stop the transmission, release the PTT button
!
The unit will go to the stand-by mode
To disable the Scan
!
Press the
SCAN
button again
!
Radio will return to normal operation.