User's Manual

*
DW
icon will appear on the LCD.
To set the dual watch(DW) channel
* Press the up[

] button or down [

] button to choose the channel.
"
oF
" means no DW mode.
"
01
up to
15
" means the channel that is dual-watched.
* Press the PTT button or MODE button to confirm.
10) Call Ringer Selection Mode
This feature provides 5 user selectable call ringer signal.
To set your favorite call ringer signal.
* Press the MODE button until the [
C
01
or up to
0
5
] appears on the LCD.
* Press the up[

] button or down [

] button to select the call melody type.
* Press the PTT button to confirm.
* To activate the call , click the "
PTT
" button twice quickly.
11) Transmitting
* Press and hold the PTT button (The "TX" LED will light with red color)
* Speak slowly and clearly
* To stop the transmission,release the PTT button
* If there are no more receiving signal for 5 seconds,the unit will go into
power save mode and then the "TX" LED will blink with green color.
12) Receiving
The coding feature reduce the possibility of interference and provide enhanced
communication.You can only listen to a call that has correct matching code.
Important ;
Before transmitting or receiving to the other parties ;
* Correct channel is selected ( 1 to 15 ) and
* Correct code is set ( 00 to 38 )
13) Channel Scanning
This feature allows you to monitor all activated channels while scanning.
To activate the Scan
* Press the
Scan
button
* Radio will begin scanning..
* When in scan mode,the display will show each scanning channel.
* After an activated channel is scaned and received signal and then if there is no
more signal,the scan will resume automatically.
To disable the Scan
* Press the
SCAN
button, the unit will stop the scanning.
*
SCAN
icon indicator will disappear from the LCD
* The unit will return to home channel.
14) Emergency Channel
The emergency function is to set the emergency channel immediately.
Press the
EMG
button,the emergency channel will display on the LCD
EMG
icon will appear on the LCD
Press the
EMG
button again,the ubit will return to home channel.
15) Call
* Click the PTT button twice quickly.(The "TX" LED will light with red color.)
9