User's Manual

To set the beep tone
* Press the Mode button until [
bP on
or
oF
] and the
BELL
icon blink on the LCD.
* Press the up[
] button or down [
] button.
* Press the PTT button or MODE button to confirm.
5) Weather alert setting
Alert setting is available in
GMRS
mode only.
To set the Weather alert receiving mode
* Press the
MODE
button until the [
AL on
or
oF
] blinks.
* Press the up[
] button or down [
] button to set the alert function.
* While the alert is ON,
weather icon
will blink both in GMRS and weather mode.
*
Weather icon
will stop the blinking on the LCD when the alert is OFF.
** While the unit is in GMRS mode,if the alert signal is received,the unit will set to
Weather Radio mode automatically and warning beep tone will generate.
** While the unit is in Weather mode,if the alert signal is received,the unit will generate
the warning beep tone.
6) Vibrator Call
The unit will vibrate when receive the call from other party.
To set the vibrator Call
* Press the Mode button until [
Ub on
or
oF
] and the
VIB
icon blink on the LCD.
* Press the up[
] button or down [
] button.
* Press the PTT button or MODE button to confirm.
7) Setting the Transmit Power HI/LO
* HI : 2.0W TX power
* LO : 500mW TX power
To set the TX output power
* Press the MODE button until the [
Po
LO
or
HI
] appears.
* Press the up[
] button or down [
] button to set the TX power
* Press the PTT button or MODE button to confirm.
*
HI
or
LO
will appear on the LCD.
** If the battery is in low condition,the TX Power will be switched to LO automatically.
eventhough the TX power is set to HI.
8) Roger tone
This feature will give the tone signal to other parties when transmitting finished
(when PTT button is released.)
To activate or disable the Roger tone
* Press the Mode button until [
rb on
or
oF
] and the
roger
icon blink on the LCD.
* Press the up[
] button or down [
] button.
* Press the PTT button or MODE button to confirm.
9
) Setting the DW(dual watch)
To set the DW mode
* Press the MODE button until the [
o
F
or
01
up to
15]
and
DW icon
blink on the LCD
.
8