User's Manual

9/15
* Turn the radio on.
* Press MODE button once, [XX] digit will blink on the LCD. XX is a channel.
* Press up[ ]or down[ ] button to choose the channel.
* Press the PTT button or MODE button to confirm.
To set the tone codes(CTCSS)
* Press MODE button once more, [XX
oF, 01
up to
38
] will appear and CTC icon
and tone code digit will blink on the LCD. “oF” means no CTCSS code.
* Press up[

]or down[

] button to choose the desired sub-channel to use.
* Press the PTT button or MODE button to confirm.
NOTE : To communicate with other GMRS/FRS units, they must
be switched to the same channel and CTCSS sub-code. To
communicate with other GMRS/FRS units that do not have sub-codes,
switch your unit to the same channel with the sub-code set to OFF.
3) VOX (Voice Operated Switching)
This option enables you to have hands-fre e conversation. You do not have to
operate the PTT button each time when you want to transmit.
You can also choose the VOX sensitivity so suit your environment of operation.
( Ex : noisy road, motor bike, factory etc. )
To Set the VOX mode
* Press the MODE button until the [Uo oF or XX] appears. XX is a vox level
* VOX icon will be appeared on the LCD.
To set the VOX level
* Press the up[  ]or down[  ] button to set the VOX level from 1 to 5.
“oF” is disable the VOX function.
“01” is least sensitive.
“
05
” is most sensitive.
* Press the PTT button or MODE button to confirm.
4) Setting the DW (dual watch)
To set the DW mode
* Press the MODE button until the [ oF of 01 up to 22] and DW icon blink on
the LCD.
* DW icon will appear on the LCD.
To set the dual watch(DW) channel