User's Manual

6/15

MODE

EMG

SCAN

1) PTT switch : Push and hold to transmit ; release to receive.

2) Monitor : Press and hold this key for over 2 seconds to enable the receive

CTCSS feature.

3) Up/Down key : In the stand-by mode, Pressing this button will increment or

decrement the listening volume. When in function edit mode,

this button will be used to adjust the unit settings..

4) Sc an / Lock key : Push this key to momentarily to enable or disable the

scan. Press and hold this key for over 2seconds to lock or

unlock keypad.

5) Mode (Function) key : Push to select the following function setting mode.

Brief press mode : 1'st press – Channel ,

2’nd press – CTCSS,

3’rd press – VOX level ,

4'th press – Dual Watch Channel,

5’th press – Roger On/Off,

6'th press – Beep On/Off,

7’th press – ID,

8’th press – Call

6) Speaker / Microphone

) LCD (Liquid Crystal Display)

8) Transmit / Receive indicator : When receiving an incoming signal, the LED

indicator will light green, and while the PTT

button is pressed, the LED will light red.

These LED ’s are used for backlighting as