User's Manual

13/16
To set the Out of Range
* Press the Mode button until [
ir on
or
oF
] and the
Out of Range
icon blink
on the LCD.
* Press the up[
″
]or down[
…
] button.
* Press the PTT button or MODE button to confirm.
8) Setting ID code
To set the Caller ID
!
Press the MODE button until the ID Icon and small segment display blinks.
!
Then press the Up or Down button to select the desired ID number from 01
to 10. “
oF
” means no ID mode.
!
Press the PTT button or Mode button momentarily to confirm the ID
number.
** When a signal is received from the radio where the one Caller ID is
selected, the radio that is receiving the signal displays the Caller ID number of
the transmitting radio.
9) Weather alert setting
To set the Weather alert receiving mode
* Press the
MODE
button until the [
AL on
or
oF
] blinks
* Press the up[
″
]button or down [
…
]button to set the alert function.
* While the alert is ON,
weather icon
will blink both in FRS and weather
mode.
*
Weather icon
will stop the blinking on the LCD when the alert is OFF.
** While the unit is GMRS/FRS mode, if the alert signal is received, the unit
will set to Weather Radio mode automatically and warning beep tone will
generate.
** While the unit is in Weather mode, if the alert signal is received, the unit
will generate the warning beep tone.
10) Call Ringer Selection Mode
This feature Provides 3 user selectable call ringer signal.
To set your favorite call ringer signal.
* Press the MODE button until the [
C
01
or up to
03
] appears on the LCD.
* Press the up[
″
]or down[
…
] button to select the call melody type.
* Press the PTT button to confirm.
* To activate the call, click the “
PTT
” button twice quickly.
11) Transmitting
* Press and hold the PTT button (The LED light red during transmission.)
* Speak slowly and clearly
* To Stop the transmission, release the PTT button.