User's Manual

6/21

1) PTT switch : Push and hold to transmit ; release to receive.

2) Monitor : Press and hold this key for over 2 seconds to enable the receive

CTCSS feature.

3) Up/Down key : In the stand-by mode, Pressing this button will increment or

decrement the listening volume. When in function edit mode,

this button will be used to adjust the unit settings..

4) Scan / Lock key : Push this key to momentarily to enable or disable the

scan. Press and hold this key for over 2seconds to lock or

unlock keypad.

5) Mode (Function) key : Push to select the following function setting mode.

Brief press mode : 1'st press – Channel ,

2’nd press – CTCSS,

3’rd press – VOX level,

4'th press – Dual Watch Channel,

5’th press – Roger On/Off,

6'th press – Beep On/Off,

7’th press – Out Of Range On/Off,

8’th press – ID,

9’th press – Call

6) Speaker / Microphone

) LCD (Liquid Crystal Display)

8) Transmit / Receive indicator : When receiving an incoming signal, the LED

indicator will light green, and while the PTT