User's Manual

3.2 Key Function

1) PTT switch : Push and hold to transmit ; release to receive.

2) Monitor : Press and hold this key for over 2 seconds to enable the receive

CTCSS feature.

3) Up/Down key : In the stand-by mode, Pressing this button will increment or

decrement the listening volume. When in function edit mode,

this button will be used to adjust the unit.

4) Scan / Lock key : Push this key to momentarily to enable or disable the

scan. Press and hold this key for over 2seconds to lock or

unlock keypad.

Charger key

This base station is set up in charge protection mode to prevent

Alkaline batteries in the handset from being charged by mistake.

Once the charger key is pressed, this radio begins to charge the

Ni-MH batteries in the handset. When the button is pressed once

again, the batteries is not charged anymore.

6) Mode (Function) key : Push to select the following function setting mode.

Brief press mode : 1'st press – Channel ,

2’nd press – CTCSS,

3’rd press – VOX level,