User's Manual

3. OPERATION

3.1 ICONS on LCD

1) Monitor indicator : Appears when the CTCSS isn’t in use and squelch is open.

2) Key lock indicator : Indicates that the key lock function is in use.

) Beep ON/OFF indicator : Appears while key tone is in use.

4) Roger On/Off indicator : Appears while Roger tone is in use.

5) Receive signal indicator : Appears when receiving signal or squelch noise is

existing.

6) ID indicator : Appears when the ID function is in use.

7) Weather mode indicator : Icon will be on steady when in the weather band

mode. The Icon will blink in every 2 seconds when in the FRS mode with the

alert active.

8) Channel readout : Shows the current channel number.

9) CTCSS readout : Shows the operating CTCSS frequency or code.

10) SCAN indicator : Indicates that scan is enabled.

11) CTCSS indicator : Appears when the CTCSS function is in use.

12) Dual Watch indicator : Appears when the Dual Watch function is in use.

13) Out Of Range indicator : Appears when the Out Of Range function is in use.

14) VOX (Voice Activated Transmit) Indicator : Turning on the

power while pressing PTT button activates VOX function.