User's Manual

12
Connections and Setup
Setup Wizard
Perform the following steps before you press on the remote
control unit.
• Insert the batteries into the remote control unit.
• Connect the antenna cable to the TV.
• Plug in the AC cord to the AC outlet.
The rst time you switch the set on, the Setup Wizard opens,
which guides you through the setup process.
1. The rst step of the setup requires you to select your
preferred language for the menu system. Press ▲/▼ to
select your language, then press OK to enter the next
screen.
2. A menu screen asks you to set the power on mode.
• Choosing “Home Mode” for the TV assigns the optimal
picture settings for most home environments.
• Choosing “Retail mode”, which is not ENERGY STAR
compliant, sets the unit up with predened settings for
retail displays. In this setting, the power consumption
may exceed the requirements of the ENERGY STAR®
qualication.
1. Use ▲/▼ to select the desired location setting (“Home
Mode” or “Retail mode”); then press OK to continue to the
next screen.
Note: if you select “Retail Mode”, a screen menu will
display to ask you go back to the previous menu to select
“Home Mode” by pressing ◄ to select Go Back and press
OK to conrm , or you can select “Proceed“ to proceed to
the next screen.
2. Use ▲/▼ to select the current local time zone. Press OK
to continue to the next screen.
3. Select either “Antenna” or “Cable/Sat” as the channel scan
type. Press OK to begin the channel scan process.
Note: Make sure what kind of connection is made with
your TV when selecting “Antenna” or “Cable/Sat”.
4. The screen will change to show the progress of the channel
scanning process, available channels will be stored in the
TV’s memory.
Note: If you do not want to scan for channels at this time,
you can press CLEAR or MENU to exit the scanning
process, and perform the channel scan later in the “Setting”
menu.
If you are using a cable set-top box, you do not have to
complete the Channel Scan.
5. When the scanning is nished, the unit will switch to the
rst channel found.
Ｓ ｅｔｕｐ Ｗ ｉｚａｒｄ
Ｗｅｌｃｏｍｅ ｔｏ ｔｈｅ ＴＣＬ ＨＤＴＶ Ｗｉｚａｒｄ．
Ｆｏｌｌｏｗ ｔｈｉｓ ｇｕｉｄｅ ｔｏ ｈｅｌｐ ｓｅｔｕｐ ｙｏｕｒ
ＨＤＴＶ ｆｏｒ Ｓ ｃａｎｎｉｎｇ Ｃｈａｎｎｅｌｓ．
Ｕｓｅ ｔｈｅ ＵＰ ａｎｄ Ｄｏｗ ｎ ａｒｒｏｗ ｓ ｏｎ ｙｏｕｒ
ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｔｏ ｓｅｌｅｃｔ ｔｈｅ ｌａｎｇｕａｇｅ．
Ｓ ｅｌｅｃｔ
ＯＫ
Ｎｅｘｔ
Ｅｎｇｌｉｓｈ
Ｅｓｐａ ñｏｌ
Ｆｒｅｎｃｈ
Ｓ ｅｔｕｐ Ｗ ｉｚａｒｄ
Ｈｏｍｅ Ｍｏｄｅ ｏｐｔｉｍｉｚｅｓ ｔｈｅ ｓｔａｎｄａｒｄ Ｅｎｅｒｇｙ Ｓ ｔａｒ
ｑｕａｌｉｆｉｃａｔｉｏｎ．
Ｕｓｅ ｔｈｅ ＵＰ ａｎｄ Ｄｏｗ ｎ ａｒｒｏｗ ｓ ｏｎ ｙｏｕｒ
ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｔｏ ｓｅｌｅｃｔ ｐｏｗ ｅｒ
ｏｎ ｍｏｄｅ．
Ｓ ｅｌｅｃｔ
ＯＫ
Ｎｅｘｔ
Ｈｏｍｅ Ｍｏｄｅ
Ｒｅｔａｉｌ Ｍｏｄｅ
Ｇｏ Ｂａｃｋ
Ｓ ｅｔｕｐ Ｗ ｉｚａｒｄ
Ｕｓｅ ｔｈｅ ＵＰ ａｎｄ Ｄｏｗ ｎ ａｒｒｏｗ ｓ ｏｎ ｙｏｕｒ
ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｔｏ ｓｅｌｅｃｔ ｔｈｅ ｃｈａｎｎｅｌ
ｓｃａｎ ｔｙｐｅ．
Ｓ ｅｌｅｃｔ
ＯＫ
Ｎｅｘｔ
Ａｎｔｅｎｎａ
Ｃａｂｌｅ／Ｓ ａｔ
Ｇｏ Ｂａｃｋ
Ｓ ｅｔｕｐ Ｗ ｉｚａｒｄ
Ｒｅｔｕｒｎ
ＣＬＥＡ Ｒ
ＭＥ ＮＵ
Ｅｘｉｔ
Ｆｏｕｎｄ ： ０ Ｃｈａｎｎｅｌｓ
Ａｎａｌｏｇ ： ０ Ｃｈａｎｎｅｌｓ
Ｄｉｇｉｔａｌ ： ０ Ｃｈａｎｎｅｌｓ
ＲＦ ＣＨ ２ １ ％
Ｓ ｅｔｕｐ Ｗ ｉｚａｒｄ
Ｕｓｅ ｔｈｅ ＵＰ ａｎｄ Ｄｏｗ ｎ ａｒｒｏｗ ｓ ｏｎ ｙｏｕｒ
ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｔｏ ｓｅｌｅｃｔ ｙｏｕｒ ｌｏｃａｌ ｔｉｍｅ
ｚｏｎｅ．
Ｓ ｅｌｅｃｔ
ＯＫ
Ｎｅｘｔ
Ｎｅｗ Ｆｏｕｎｄｌａｎｄ
Ａｔｌａｎｔｉｃ
Ｅａｓｔｅｒｎ
Ｃｅｎｔｒａｌ
Ｍｏｕｎｔａｉｎ
Ｐａｃｉｆｉｃ
Ａｌａｓｋａ
Ｈａｗ ａｉｉ
Ｓ ａｍｏａ
Ｇｏ Ｂａｃｋ