User's Manual

EN 14
Chapter 2 TV Operation
Menu Display
Figures and illustrations below are provided for reference only and may dier from actual product appearance.
Archivos
Initial Setup
The Setup Wizard appears the rst time you turn on the
TV, and assists you to specify the Air/Cable setting, and
program your channels automatically.
IMPORTANT: Make sure you are connected to an antenna
or cable TV system.
1. To turn on the TV, press . (It may take approx. 10
seconds for a picture to appear on screen.) The Initial
Setup Wizard begins.
2. Press to select your language, then select go to
next step to conrm your “Time Zone” and “Daylight
Saving” setting. Then “Go to next step”.
3. Press to select “Air” or “Cable” then select “Go to
next step”.
4. Press to select Scan and then select “Go to
next step” to start the channel search function. All
available TV channels will be stored. This operation
takes a few minutes. Auto Channel Scan will begin.
After the scan is completed, a TV channel will appear
on the screen.
Source
Includes TV, AV, HDMI1, HDMI2 and HDMI3 (see Figure
2). Press to select the input source, then press OK
to conrm your choice.
• Depending on the reception condition, it may take up
to 30 minutes to complete scanning channels. Please
allow the process to complete without interruption.
Note: During the setup, you can follow the navigation
help available at the bottom of the screen.