User's Manual

22
• Frequency Range - Displays the different graphic equalizer bands set for each Sound Preset
option. Choose a band and make adjustments. When you make adjustments, the Sound Preset
option automatically changes to Personal. Press to select the frequency (100Hz, 300Hz,
1KHz, 3KHz, 10KHz) you want to adjust. Use the to adjust the level. When you are done
adjusting the levels, press the MENU button to exit.
Balance Press
to adjust the level of audio sent to the
left and right speakers.
Surround On/Off
Speaker On/Off. When you select Off, the sound speaker
of TV will be turned off.
SPDIF TYPE Press
to selecy SPIDF type.
Auto Volume Level Reduces the annoying blasts in
volume during commercial breaks, and also amplies
softer sounds in program material. Eliminates the need to
constantly adjust the volume.
Auto Volume Control Reduces the annoying blasts in volume during commercial breaks, and also
amplies softer sounds in program material. Eliminates the need to constantly adjust the volume.
Analog TV Sound Controls the manner in which the sound comes through the speakers. The
available options vary according to the input selected.
Mono (available for regular TV viewing only) - This option plays the sound in mono only. Use this
setting when receiving broadcasts with weak stereo signals.
Stereo - This option splits the incoming stereo audio signal into left and right channels. Most TV
programs and recorded materials have stereo audio. The word “Stereo” appears in the Channel
Banner when you tune to a program that is broadcast in stereo.
Secondary Audio Program (SAP) Plays the program’s audio in a second language, if one is
available. The letters SAP appear in the channel banner when a program is broadcast with SAP
information. SAP audio is broadcast in mono. SAP is also used to broadcast an audio description
for the program for the visually impaired.
Second Audio Program (SAP) Plays the program’s audio in a second language, if one is available.
The letters SAP appear in the channel banner when you tune to a program that is broadcast with
SAP information. SAP audio is broadcast in mono. SAP is also used to broadcast a program’s
audio with descriptions of the video for the visually impaired.
Setup Menu
The Setup menu allows you to congure the TV with your
preferences. Press MENU on the remote to open the main
menu, press to select Setup, then press OK or to
display options:
A. Signal Type
Choose the type of signal (Cable / Antenna) you have
connected to the ANTENNA/CABLE INPUT.
Chapter 3 Using the TV menu
Sound
Setup
Parental Control
Language
Sound
Picture
Equalizer
Balance
Surround
Analog TV Sound
USB
Exit
0
On
Stereo
Speaker
On
SPDIF Type
Dolby Digital
Auto Volume Control
Off
Back
MENU
Adjust
Select Exit
CLEAR
Setup
Setup
Parental Control
Language
Sound
Picture
Signal Type
Channel Scan
USB
Exit
Cable
Channel Skip
Channel Edit
Input Skip
Input Labels
Closed Caption
Time Setup
Reset All
Back
MENU
Adjust
Select Exit
CLEAR