User's Manual

14
C. Component Video Connnection (Better)
Component video connection offers better picture quality for video devices connected to the unit.To
connect a component that has Y Pb Pr jacks, such as a DVD player, follow these steps:
Example: DVD Player
1. Connect three video cables or special Y Pb Pr cables to the COMPONENT INPUT (CMPT) Y Pb Pr
jacks on the back of the TV and to the Y Pb Pr outputs on the DVD player.
2. Connect your red and white audio cables to the COMPONENT INPUT (CMPT) right and left AUDIO
jacks (shared with the composite AUDIO/VIDEO INPUT(VID)) on the back of the TV and to the
audio output jacks on the DVD player.
3. Turn on your TV, then turn on the DVD Player.
4. Press INPUT to open the Input list, then press INPUT repeatedly to select CMPT.
D. Composite Video Connection (Good)
To connect a component with a video output jack, such as a DVD player, follow these steps:
Example: DVD Player
1. Connect the yellow video cable to the (VID) VIDEO jack on the back of the TV and to the video
output jack on the DVD player.
2. Connect the red and white audio cables to the (VID) right and left audio jacks on the back of the
TV and to the audio output jacks on the DVD player.
3. Turn on your TV, then turn on the DVD Player.
4. Press INPUT to open the Input list, then press INPUT repeatedly to select VID.
Y
Pb
Pr
L
AUDIO
R
COMPONENT
INPUT (CMPT)
LRPr Pb Y
Rear of this unit
VIDEO
L
AUDIO
R
AUDIO/VIDEO
INPUT (VID)
VIDEOL R
AUDIO
Rear of this unit
Chapter 1 Connections and Setup