User's Manual

Import the settings in the memory card (*If a machine without this function,
then this one is not optional)
make the settings which are stored in the memory card set into the
EEPOM , and go into effect.
Software upgrading
Upgrade the main board program from the U-disk
Play mode
Two mode: auto-play mode and playlist mode
auto-play mode: play the content which is edited by customer;
playlist mode :play the content which is selected by the remote
control
Hanging mode :( *If a machine without this function, then this one is not
optional)
Set as: horizontal, 90 degrees, 270 degrees, select according to the
installation direction.
Restore factory settings
Make all the user information restore to Factory Default
System information
Display the machine ID and software version
Password: manually enter the initial password (12345678),t hen you
can go on other operation.
Terminal activating: import the activation files. After successful
activation , you can bind the terminal player to the management platform .
Client information importing: import the client’s interface address
files .After successfully importing, you can achieve the interface connection between
the terminal player and server.
Terminal registration: get the terminal number register into the server, so
as to manage the terminal player uniformly through network management platform.
Log record (*If a machine without this function, then this one is not
optional )
Set the retention time of the play-log as: close , 7days, 15days, 30days,
60days, permanent retain.
5. Network settings submenu
① Press the” menu” button on the remote control, and th
en press ?????button
in turns to unlock.
② Press “??” button to select “sound settings” menu, and press ”confirm”
button to enter
Include following four settings:
Network setting: network (wired), network (WIFI).
Wired network: When the machine connects to the network through
Router, network cable , you should do corresponding network settings
through ”wired network”.
Wireless network: When the machine connects to the network through