User's Manual

Set as: horizontal, 90 degrees, 270 degrees, select according to the
installation direction.
Restore factory settings
Make all the user information restore to Factory Default
System information
Display the machine ID and software version
Password: manually enter the initial password (12345678),t hen you
can go on other operation.
Terminal activating: import the activation files. After successful
activation , you can bind the terminal player to the management platform .
Client information importing: import the client’s interface address
files .After successfully importing, you can achieve the interface connection between
the terminal player and server.
Terminal registration: get the terminal number register into the server, so
as to manage the terminal player uniformly through network management platform.
Log record (*If a machine without this function, then this one is not
optional )
Set the retention time of the play-log as: close , 7days, 15days, 30days,
60days, permanent retain.
5. Network settings submenu
① Press the” menu” button on the remote control, and then press ?????button
in turns to unlock.
② Press “??” button to select “sound settings” menu, and press ”confirm”
button to enter
Include following four settings:
Network setting: network (wired), network (WIFI).
Wired network: When the machine connects to the network through
Router, network cable, you should do corresponding network settings
through ”wired network”.
Wireless network: When the machine connects to the network through
the USB-WLAN Card, you should do corresponding network settings
through ”Wireless network”.
ADSL dialing :When connecting the player with the ADSL modem
directly rather than Router, then go on ADSL dialing through setting the “ADSL
dialing” .Please enter the user name and password of the ADSL. You should do the
corresponding operation every time the player is powered on.
a. Wired network
Select “Network” >” Network (wired)” > “Wired Network” There are two ways
to obtain an IP address(Automatically or manually) in the setting of wired
network, as shown below.
Here we will focus on how to obtain the IP address manually. After entering the
interface of “manually set IP address”, input those numbers which are selected by