R0 72-L23F33-XNA1A : , BOM 23F3300(MS39R) NA-TCL (BRAND NAME) H3-23E33BJ-USAAWAA B.O.M. ² ¹ É ²º (TO): (TYPE OF JOB.): i) ii) iii) iv) TCL TCL PREPARED BY Ï Û Wash Printing Silk Screen Printing ² ¹É QA ²º ¿ ¹ PE ² ³ ¤ ¹É ²Ì ² º ¿ ¿ Four-Colour Printing Spraying Paint Plastic Colour (SCALE) : 1:1 (SIZE) (COLOUR) : A5 : ODF ODF DATE: CUSTOMER 李英 ¸ã ² ² Æ¿ ¹É ·² ²º ¿ ¿ PMC IQC ¿ 2013-11-19 数字签名人 李英 DN： cn=李英， ou=Shenzhen， dc=com 日期： 2013.11.
User’s Guide For use with models: 23F3300 Need assistance? visit our website at www.tclusa.com or call 1-877-300-8837 (for mainland 48 States), or 1-877-800-1269 (for AK, HI, and Puerto Rico). Figures and illustrations in this User’s Guide are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Important Information This symbol indicates that this product incorporates double insulation between hazardous main voltage and user accessible parts. When servicing, use only identical replacement parts. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.
Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Table of Contents Important Information ................................ 1 Important Safety Instructions ..................... 2 Advanced Settings ........................................ 14 Sound Menu ............................................ 14 Equalizer ....................................................... 14 Speaker ........................................................ 14 SPDIF Type .................................................. 14 Smart Volume .............................................
Chapter 1 Connections and Setup Before Initial Setup Protect Against Power Surges • • • • Connect all components before you plug any power cords into the wall outlet or power strip. NEVER plug your TV into an outlet that is controlled by a wall switch. Turn off the TV before you connect or disconnect any cables. Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions. Safety Information • • • • • Protect components from overheating.
Connections and Setup Attaching Your TV to the Base Stand Your TV comes without the base stand attached so that you can choose to mount your TV either to its base stand or to a wall (wall mount sold separately). If you want to mount your TV to the wall, don’t attach the base stand, just remove the base stand from the back of TV as step 1. Follow the Mounting Your TV to the Wall instructions. First, remove the TV bag and place it on a large, flat surface such as a table or countertop.
Connections and Setup Buttons on TV If you cannot locate your remote, you can use the TV panel buttons on your TV to operate many TV features. CH+/- VOL+/- Selects channels stored in the channel list or acts as the up/ down arrow (▲/▼) through the menu items. Increases/decreases the volume or acts as the right/left arrow (◄/►) through the menu items. VOL+ also acts as the OK button when in the menu system. MENU Brings up the TV’s main menu. INPUT Selects the signal source.
Connections and Setup USB: Allows you to connect a compatible mass storage device. HDMI IN (DVI) (High-Definition Multimedia Interface/ Digital Visual Interface): Provides an uncompressed digital connection that carries both video and audio data by way of an integrated mini-plug cable. Since HDMI technology is based on Digital Visual Interface (DVI), the jack on the back of your TV is also compatible with DVI components.
Connections and Setup HDMI IN AUDIO/VIDEO IN (AV) COMPONENT IN (CMPT) Input Menu operation for input source selection or select the input source directly by pressing INPUT button.
Connections and Setup Remote Control Functions INPUT Press INPUT repeatedly to select the video input 0-9 (Alphanumeric buttons) Enters a channel number, then press OK (or let the entry timeout). • (dot) To enter a digital channel with a sub-channel, enter the main channel; then, press the dot (•), the subchannel, and then the OK button. MENU ▲/▼◄/► Brings up the main menu or press to return to the previous menu. (arrows) Highlights different items in the TV menu and adjusts the menu controls.
Connections and Setup Obtain the Signal The first step in connecting your TV is obtaining the signal. The back panel of your TV allows you to receive analog and/or digital channels by using the HDMI or ANT/CABLE/SAT connections. To obtain the best quality, use the HDMI connection. Connect the outside ariel to the ANT/CABLE/SAT IN Outdoor or indoor Antenna connection on the back of the TV to receive off-air channels.
Connections and Setup Setup Wizard Perform the following steps before you press on the remote control unit. • Insert the batteries into the remote control unit. • Connect the antenna cable to the TV. • Plug in the AC cord to the AC outlet. The first time you switch the set on, the Setup Wizard opens, which guides you through the setup process. 1. The first step of the setup requires you to select your preferred language for the menu system.
Chapter 2 Menu Operation Menu Display The following are just illustrations of the menu display. Some menu items may not be displayed depending on the selected input source.
Menu Operation display the menu screen. Press▲/▼ to select “Picture”, then press OK/► to display options. Using Menu System This section explores the menus of your TV. Each menu is outlined and detailed to help you get the most from your TV. Example: Picture Mode Displays a list that lets you select one of the preset picture settings: “Energy Star, Vibrant, Cinematic, Natural, Sports, Personal.” Choose the setting that best for your viewing environment.
Menu Operation This option controls the type of audio stream sent to the Digital Audio Output jack (SPDIF OUT). Available options are “Dolby Digital, PCM”. Advanced Settings Zoom Mode: Selects the desired screen format. The screen format may vary depending on the incoming signal. Smart Volume 3DNR (Noise Reduction): This setting reduces picture “static” or any type of interference. This feature is especially useful for providing a clearer picture in weak analog signal conditions.
Menu Operation press CLEAR to close the menu. DTV Signal: Show the condition of DTV signal: Good or Bad, Normal. Bad for no DTV signal or very weak DTV signal. Channel Signal Source: Choose the signal source (“Cable/ Sat” or “Antenna”) you have connected to the ANT/CABLE/SAT IN. Scan: When you perform a Channel Scan, your TV searches for channels with signals and stores the channel information in the Channel List.
Menu Operation of the closed caption text. the TV will continue with Parental settings next time. The super password is 2458, If you forget your password, enter it to override any existing password. Font Edge Color - lets you set the color of the closed caption text edge. FG Color - Allows you to set the color of the digital closed caption text. System Lock BG Color - Allows you to choose the color of the area of the screen behind the digital closedcaption.
Menu Operation Movie ratings: G PG PG-13 R NC-17 X 1. Select Parental Control > Unrated. 2. Press ◄/► to toggle between View and Block. View All unrated programs are available. General audience Parental guidance suggested Unsuitable for children under 13 Restricted, under 17 requires companying parent or adult guardian No one under 17 admitted Mature audience only Block All unrated programs are not available.
Menu Operation Restore to Default This option resets all settings (except parental lock settings) to the factory defaults. 1. Select “Setting > Restore to default”, Press OK/► to enter, and you must enter your password befor proceding to the next step. 2. Press ▲/▼to select "Confirm" and press OK to confirm to reset all settings. USB Menu You can connect a device with USB to your TV or use a USB flash drive (only suppports FAT, FAT32 and NTFS format USB device).
Chapter 3 Other Information Frequently Asked Questions (FAQs) What’s the quickest way to view High Definition (HD) video? Connect an off-air antenna to the ANT/CABLE/SAT IN to view free local digital channels. You may need to purchase an antenna. Visit www.antennaweb.org for assistance in deciding what type of antenna to use to receive the local digital channels available to you.
Other Information Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. TV Problems The TV won’t turn on. • • • • Make sure the TV is plugged in. Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in another device. The TV panel controls may be locked (disabled). Use the remote control to unlock the TV panel controls.
Other Information You can’t select a certain channel. • • • The channel may be blocked or not approved in the Parental Control Menu. If using a VCR, check to make sure the TV/VCR button on the VCR is in the correct mode (press the TV/ VCR button on your VCR). Press the TV button and then try to change channels. The stereo reception is noisy. • It may be a weak station. Use the Sound Menu and Analog TV Sound to choose mono. A black box appears on the screen. • Closed captioning might be on.
Other Information Care and Cleaning Caution: Turn OFF your TV before cleaning. You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help assure adequate ventilation. IMPORTANT: Never use strong cleaning agents, such as ammonia-based cleaners, or abrasive powder. These types of cleaners will damage the TV. The TV’s screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar the screen.
TTE Technology, Inc. (“TTE”) Limited Warranty All LCD/LED Models. What your warranty covers: Defects in materials or workmanship to the original owner of this TCL product when purchased as new from an Authorized Dealer of TCL brand products in the United States and packaged with this warranty statement. New LCD/LED Televisions (Non-Commercial Use) For how long after your purchase: • One (1) years from date of purchase for parts and labor for non-commercial use.
• • • • • A television that has been modified or incorporated into other products. A unit purchased or serviced outside the USA. A unit sold in “As-Is”, “Factory Reconditioned”, “Factory Re-Certified”, or “Refurbished” condition or with faults. Acts of nature or God, such as but not limited to earthquake or lightning damage. Special, incidental or consequential damages. Product Registration: Please register your TCL purchase on-line at www.tclusa.com.
Legal Statement of TCL - Manufacturer of this TV set Due to the various capabilities of products featuring the Smart TV - Services, as well as limitations in the available content, certain features, applications, and services may not be available on all devices or in all territories. Some features on Smart TV may also require additional peripheral devices or membership fees that are sold separately. Please visit our website for more information on specific device information and content availability.
This product incorporates HDMI technology. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency (EPA). ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices.
