Operation Manual

Instruction
Form：DP5-005 Revised：05 37
6.1 Parameter for Wireless ST
●Enable/Disable setting
ON･･･Wireless communication is performed with output antenna changing between ANTENNA1
and ANNTENA2 based on parameter.
・Interval of antenna changing judgment
・Rate of receiving stop for antenna changing judgment
・Number of times for antenna changing of single direction communication
OFF･･･Only ANTENNA1 performs wireless communication as output antenna.
●Interval of antenna changing judgment
●Rate of receiving stop for antenna changing judgment
Communication status with wireless terminal is checked per [Interval of antenna changing judgment].
If receiving is stopped longer than [Rate of receiving stop for antenna changing judgment], antenna is
changed.
■Antenna reshuffling judgment interval
I check the ratio of radio stop
in the time when I set it
Wireless connection state
⇒There is the reception
Wireless connection state
⇒Reception stop
≦
Stop time to wirelessly receive
Antenna reshuffling judgment
interval
Antenna reshuffling
judgment ratio
no antenna reshuffling
＞
Stop time to wirelessly receive
Antenna reshuffling judgment
interval
Antenna reshuffling
judgment ratio
Antenna reshuffling practice
t [msec]
ANTENNA1
ANTENNA2
OFF
ON
RUN
COLLISION
RECEIVE/LINK
COM PORT
PRG
RF LINK
MODE
ANTENNA