Operation Manual

Instruction
Form：DP5-005 Revised：05 34
Wireless parameter (For details, refer to [6.Parameter explanation].)
Item Default setting Setting range
Initial mode Wireless
frequency
2453MHz (Ch52) 2402MHz(Ch1)-
2480MHz(Ch79)
Wireless ID 52 0-255
Parameter write
waiting mode
Radio frequency 2480MHz (Ch79) 2402MHz(Ch1)-
2480MHz(Ch79)
Wireless ID 0 0-255
* Inspection mode and parameter write mode is run on parameter that is set at wireless ST side.
Mode shift parameter (For details, refer to [6.Parameter explanation].)
Item Default setting Setting range
Wireless cut down
timeout
Inspection mode 1000msec 100msec-65535msec
Parameter write mode
Sleep shift wait time 3600sec 60sec-65535sec
Sleep release time 80msec 30msec-65535msec
Sleep time 730msec 345msec-65535msec
<TM5317B specifications>
In the United States and Canada, use of 2480 MHz and + 5 dBm is restricted to correspond to
FCC / IC.
If 2480 MHz is set, the wireless module automatically changes to 2479 MHz.
If a value greater than +3dBm is set, the wireless module will automatically change to +3 dBm.
In other countries, there is no use restrictions on frequency and output.