Operation Manual

Instruction
Form：DP5-005 Revised：05 29
《Wireless terminal》
No
Phenomenon Possible cause Countermeasure
1
RUN LED is not blink
DLC3 connection
error
Wireless terminal may not be connected to DLC3
connector. Confirm if it is inserted correctly.
2 Sleep mode
Disconnect and connect wireless terminal with DLC3
connector and supply power again.
3 Hardware error
Hardware may be malfunction. Replace it to sub unit
and contact us.
4
Wireless VIM error
occurs
Vehicle ignition
OFF or ACC
Turn ON vehicle ignition.
Some ECU cannot communicate if vehicle ignition is
OFF or ACC.