Operation Manual

Instruction
Form：DP5-005 Revised：05 20
＜Restriction＞
・VIN No is required to registered to vehicle before software writing is started.
⇒ Conrirm if VIN NO of vehicle is same as from terminal control device for Wireless terminal.
・Vehicle is always IG-ON when software writing.
・Wireless terminal cannot be disconnected from start process to confirmation process.
・Original wireless system of wireless terminal and WiFi cannot be used same time.
⇒ Inspection by diag communication cannot be performed when software writing.
・If software data is large size, writing maybe not completed by required time.
Software data (.cuw) size is estimated to 1-2MB.（Size of 1 file）
If there are multiple software data (.cuw), file summary is maximum 10MB.
・Caution of WiFi(Wireless terminal) usage
This product cannot be used by 5GHz range outdoor.
If this product is used outdoor, use 2.4GHz range.
・If many WiFi device are used or radio wave condition is not good,
Writing cannot be completed within estimated period because of communication
error/communication speed reduction.
⇒ Perform WiFi condition control / maintenance by customer after deriverly of this products.
・Caution of access point (WiFi router) usage
Use by access point mode (Bridge mode). (Router function is OFF）