User's Manual
Table Of Contents
- Front Cover
- Table of Contents
- Disclaimer
- 1 General description
- 2 Instructions for safe operation
- 3 Standards and guidelines
- 4 Standard compliance
- 5 Connectors and pins
- 6 Specification of inputs and outputs
- 6.1 Positive power supply (BAT+)
- 6.2 Negative power supply (BAT-)
- 6.3 Ignition on switch input (Terminal 15)
- 6.4 External Wake-up
- 6.5 Service Enable
- 6.6 100BASE-TX interface
- 6.7 100BASE-T1 interface
- 6.8 USB OTG interface
- 6.9 USB Host interface
- 6.10 RS-232 interface
- 6.11 CAN interface
- 6.12 Analog video input
- 6.13 Camera supply
- 7 Internal structure
- 8 Power modes
- 9 Device front
- 10 Connectors and cable specifications
- 11 References
- 12 Glossary
1. GENERAL DESCRIPTION
1.4.3 Physical specifications
• Dimensions:
– Width: 306 mm
– Height: 212 mm
– Depth
1
: 34 mm
– Depth, incl. connector
2
: 46 mm
• Operating ambient temperature: -30 to +70
○
C
• Storage temperature: -30 to +85
○
C
• IP6K5 rated housing
Other device dimensions, including tolerances, weight and other physical specifications for Vision 312
can be found in the Product Drawing (PD) [1]. Additional physical specifications, including thermal re-
quirements, can be found in the Mounting Requirements Document (MRD) [2].
1.4.4 Block diagrams
1.4.4.1 Vision 312
Figure 1: Block diagram for Vision 312 products
1. from front side of display to mounting surface of arm mount at the rear
2. from front side of front frame to the back side of the main connector
© TTControl GmbH 2020. All rights reserved.
Confidential and Proprietary Information
7
Document Number:
D-156-G-02-001