User's Manual
Table Of Contents
- Front Cover
- Table of Contents
- Disclaimer
- 1 General description
- 2 Instructions for safe operation
- 3 Standards and guidelines
- 4 Standard compliance
- 5 Connectors and pins
- 6 Specification of inputs and outputs
- 6.1 Positive power supply (BAT+)
- 6.2 Negative power supply (BAT-)
- 6.3 Ignition on switch input (Terminal 15)
- 6.4 External Wake-up
- 6.5 Service Enable
- 6.6 100BASE-TX interface
- 6.7 100BASE-T1 interface
- 6.8 USB OTG interface
- 6.9 USB Host interface
- 6.10 RS-232 interface
- 6.11 CAN interface
- 6.12 Analog video input
- 6.13 Camera supply
- 7 Internal structure
- 8 Power modes
- 9 Device front
- 10 Connectors and cable specifications
- 11 References
- 12 Glossary
1. GENERAL DESCRIPTION
1.4 Features
The following tables compare the features of the Vision 312 family products:
1.4.1 System components
Vision 312 Vision 312Plus
CPU i.MX 6Solo Processor 800 MHz –
ARM Cortex-A9 (single core)
i.MX 6QuadPlus Processor 1 GHz
– ARM Cortex-A9 (quad core)
DDR3 RAM 512 MB 2 GB
eMMC Flash 4 GB 8 GB
Display 12.1”, 1280x800 12.1”, 1280x800
500 cd/m
2
luminance, 1000 cd/m
2
luminance,
1000:1 contrast ratio 1000:1 contrast ratio
Touchscreen Yes Yes
Bonding
Fully bonded
Fully bonded
Speaker Integrated loudspeaker Integrated loudspeaker
Real-time clock
(super-capacitor buffered)
1 1
Non-volatile memory 32 kByte EEPROM 32 kByte EEPROM
1.4.2 Interfaces
Vision 312 Vision 312Plus
CAN 2 4 (1 ISOBUS compliant)
Analog video input 2 (PAL/NTSC) 4 (PAL/NTSC)
USB 1 (OTG) 2 (1 OTG, 1 HOST)
Ethernet 1 (100BASE-T1) 1 (100BASE-TX)
RS-232 1 1
Terminal 15 1 1
Wake-up 1 1
Temperature sensor 2 2
Status LED 1 (RGB) 1 (RGB)
Ambient light sensor 1 1
© TTControl GmbH 2020. All rights reserved.
Confidential and Proprietary Information
6
Document Number:
D-156-G-02-001