User's Manual
Table Of Contents
- Front Cover
- Table of Contents
- Disclaimer
- 1 General description
- 2 Instructions for safe operation
- 3 Standards and guidelines
- 4 Standard compliance
- 5 Connectors and pins
- 6 Specification of inputs and outputs
- 6.1 Positive power supply (BAT+)
- 6.2 Negative power supply (BAT-)
- 6.3 Ignition on switch input (Terminal 15)
- 6.4 External Wake-up
- 6.5 Service Enable
- 6.6 100BASE-TX interface
- 6.7 100BASE-T1 interface
- 6.8 USB OTG interface
- 6.9 USB Host interface
- 6.10 RS-232 interface
- 6.11 CAN interface
- 6.12 Analog video input
- 6.13 Camera supply
- 7 Internal structure
- 8 Power modes
- 9 Device front
- 10 Connectors and cable specifications
- 11 References
- 12 Glossary
11. REFERENCES
ISO 7637-3 2016 Road vehicles — Electrical disturbances from conduction and coupling —
Part 3: Electrical transient transmission by capacitive and inductive cou-
pling via lines other than supply lines
IEC 60068-2-1 2007 Environmental testing — Part 2-1: Tests — Test A: Cold
IEC 60068-2-2 2007 Environmental testing — Part 2-2: Tests — Test B: Dry heat
IEC 60068-2-6 2007 Environmental testing — Part 2-6: Tests — Test Fc: Vibration (sinusoidal)
IEC 60068-2-14 2009 Environmental testing — Part 2-14: Tests—Test N: Change of temperature
IEC 60068-2-27 2008 Environmental testing — Part 2-27: Tests — Test Ea and guidance: Shock
IEC 60068-2-30 2005 Environmental testing — Part 2-30: Tests — Test Db: Damp heat, cyclic
(12 h + 12 h cycle)
IEC 60068-2-31 2008 Environmental testing — Part 2-31: Tests — Test Ec: Rough handling
shocks, primarily for equipment-type specimens
IEC 60068-2-64 2008 Environmental testing — Part 2-64: Tests — Test Fh: Vibration, broadband
random and guidance
IEC 60068-2-78 2012 Environmental testing — Part 2-78: Tests — Test Cab: Damp heat, steady
state
ISO 20653 2013 Road vehicles — Degrees of protection (IP code) — Protection of electrical
equipment against foreign objects, water and access
EN 13309 2010 Construction machinery. Electromagnetic compatibility of machines with
internal power supply
EN 62262 2002 Degrees of protection provided by enclosures for electrical equipment
against external mechanical impacts (IK code)
EN 55025 2016 Vehicles, boats and internal combustion engines. Radio disturbance char-
acteristics. Limits and methods of measurement for the protection of on-
board receivers (IEC/CISPR 25:2016)
ISO 13766-1 2018 Earth-moving and building construction machinery — Electromagnetic
compatibility (EMC) of machines with internal electrical power supply —
Part 1: General EMC requirements under typical electromagnetic environ-
mental conditions
ISO 13766-2 2018 Earth-moving and building construction machinery — Electromagnetic
compatibility (EMC) of machines with internal electrical power supply —
Part 2: Additional EMC requirements for functional safety
ISO 4892-3 2016 Part 3: Fluorescent UV lamps
ISO 14982 2009 Agricultural and forestry machines — Electromagnetic compatibility — Test
methods and acceptance criteria
© TTControl GmbH 2020. All rights reserved.
Confidential and Proprietary Information
43
Document Number:
D-156-G-02-001