User's Manual
Table Of Contents
- Front Cover
- Table of Contents
- Disclaimer
- 1 General description
- 2 Instructions for safe operation
- 3 Standards and guidelines
- 4 Standard compliance
- 5 Connectors and pins
- 6 Specification of inputs and outputs
- 6.1 Positive power supply (BAT+)
- 6.2 Negative power supply (BAT-)
- 6.3 Ignition on switch input (Terminal 15)
- 6.4 External Wake-up
- 6.5 Service Enable
- 6.6 100BASE-TX interface
- 6.7 100BASE-T1 interface
- 6.8 USB OTG interface
- 6.9 USB Host interface
- 6.10 RS-232 interface
- 6.11 CAN interface
- 6.12 Analog video input
- 6.13 Camera supply
- 7 Internal structure
- 8 Power modes
- 9 Device front
- 10 Connectors and cable specifications
- 11 References
- 12 Glossary
9. DEVICE FRONT
≡
9 Device front
The status LED and the ambient light sensor are on the front side as shown in figure 11 below.
Figure 11: Front view of the Vision 312 device
9.1 Display
The Vision 312 device is equipped with a 12.1 inch TFT LCD module with a resolution of 1280 x 800 pixels
(WXGA) and a LED backlight unit.
9.1.1 Characteristics
Symbol Parameter Note Min Typ Unit
L
C
Center luminance of white 1 500 cd/m
2
L
C
Center luminance of white 2 1000 cd/m
2
CR Contrast ratio 800 1000
t
L
LED lifetime of backlight unit 3 50000 hours
Note 1 Only for the Vision 312 products.
© TTControl GmbH 2020. All rights reserved.
Confidential and Proprietary Information
35
Document Number:
D-156-G-02-001