User's Manual
Table Of Contents
- Front Cover
- Table of Contents
- Disclaimer
- 1 General description
- 2 Instructions for safe operation
- 3 Standards and guidelines
- 4 Standard compliance
- 5 Connectors and pins
- 6 Specification of inputs and outputs
- 6.1 Positive power supply (BAT+)
- 6.2 Negative power supply (BAT-)
- 6.3 Ignition on switch input (Terminal 15)
- 6.4 External Wake-up
- 6.5 Service Enable
- 6.6 100BASE-TX interface
- 6.7 100BASE-T1 interface
- 6.8 USB OTG interface
- 6.9 USB Host interface
- 6.10 RS-232 interface
- 6.11 CAN interface
- 6.12 Analog video input
- 6.13 Camera supply
- 7 Internal structure
- 8 Power modes
- 9 Device front
- 10 Connectors and cable specifications
- 11 References
- 12 Glossary
6. SPECIFICATION OF INPUTS AND OUTPUTS
6.13 Camera supply
6.13.1 Pinout
Connector Pin no. Note Function
C1 9 Camera 1 Supply
C1 17 Camera 1 GND
C1 7 Camera 2 Supply
C1 15 Camera 2 GND
C1 28 1 Camera 3 Supply
C1 23 1 Camera 3 GND
C1 20 1 Camera 4 Supply
C1 19 1 Camera 4 GND
Note 1 Only for Vision 312Plus products.
6.13.2 Functional description
A 12 V supply is provided to power external cameras.
6.13.3 Maximum ratings
Symbol Parameter Min Max Unit
V
sc
Short circuit voltage range -1 33 V
6.13.4 Characteristics
Symbol Parameter Note Min Max Unit
V
cam
Output voltage 1 0 0 V
V
cam
Output voltage 2 V
BAT+
-1.7 0.9*V
BAT+
V
V
cam
Output voltage 3 11.7 12.5 V
I
out
Overall output current 4 1500 mA
I
out
Overall output current 5 2500 mA
Note 1 V
BAT+
< 7.5 V (for power supply below 7.5 V, see section 6.1.2.1.)
Note 2 7.5 V ≤ V
BAT+
≤ 13.3 V
Note 3 V
BAT+
> 13.3 V
Note 4 For Vision 312
Note 5 For Vision 312Plus
© TTControl GmbH 2020. All rights reserved.
Confidential and Proprietary Information
30
Document Number:
D-156-G-02-001