User's Manual
Table Of Contents
- Front Cover
- Table of Contents
- Disclaimer
- 1 General description
- 2 Instructions for safe operation
- 3 Standards and guidelines
- 4 Standard compliance
- 5 Connectors and pins
- 6 Specification of inputs and outputs
- 6.1 Positive power supply (BAT+)
- 6.2 Negative power supply (BAT-)
- 6.3 Ignition on switch input (Terminal 15)
- 6.4 External Wake-up
- 6.5 Service Enable
- 6.6 100BASE-TX interface
- 6.7 100BASE-T1 interface
- 6.8 USB OTG interface
- 6.9 USB Host interface
- 6.10 RS-232 interface
- 6.11 CAN interface
- 6.12 Analog video input
- 6.13 Camera supply
- 7 Internal structure
- 8 Power modes
- 9 Device front
- 10 Connectors and cable specifications
- 11 References
- 12 Glossary
5. CONNECTORS AND PINS
5.2 Main Connector (C1)
Mates with: TE Connectivity 4-1437290-0
Figure 4: Main Connector C1 pinout
Vision 312 Vision 312Plus
Pin no. Direction Function Direction Function
26 BAT+ BAT+
27 in Service in Service
18 in Terminal 15 in Terminal 15
10 in Wake-up in Wake-up
1 BAT- BAT-
2 BAT- BAT-
8 in Video 1 Signal in Video 1 Signal
16 Video 1 GND Video 1 GND
9 out Camera 1 Supply out Camera 1 Supply
17 Camera 1 GND Camera 1 GND
6 in Video 2 Signal in Video 2 Signal
14 Video 2 GND Video 2 GND
7 out Camera 2 Supply out Camera 2 Supply
15 Camera 2 GND Camera 2 GND
29 in Video 3 Signal
31 Video 3 GND
28 out Camera 3 Supply
23 Camera 3 GND
21 in Video 4 Signal
22 Video 4 GND
20 out Camera 4 Supply
© TTControl GmbH 2020. All rights reserved.
Confidential and Proprietary Information
14
Document Number:
D-156-G-02-001