User's Manual
Table Of Contents
- Front Cover
- Table of Contents
- Disclaimer
- 1 General description
- 2 Instructions for safe operation
- 3 Standards and guidelines
- 4 Standard compliance
- 5 Connectors and pins
- 6 Specification of inputs and outputs
- 6.1 Positive power supply (BAT+)
- 6.2 Negative power supply (BAT-)
- 6.3 Ignition on switch input (Terminal 15)
- 6.4 External Wake-up
- 6.5 Service Enable
- 6.6 100BASE-TX interface
- 6.7 100BASE-T1 interface
- 6.8 USB OTG interface
- 6.9 USB Host interface
- 6.10 RS-232 interface
- 6.11 CAN interface
- 6.12 Analog video input
- 6.13 Camera supply
- 7 Internal structure
- 8 Power modes
- 9 Device front
- 10 Connectors and cable specifications
- 11 References
- 12 Glossary
3. STANDARDS AND GUIDELINES
≡
3 Standards and guidelines
Vision 312 was developed in compliance with the following international standards and guidelines:
CE-Mark 2014/30/EU
E-Mark ECE 10R-05
FCC Title 47, Part 15B
EMC ISO 13766
EN 13309
ISO 7637-3
ESD ISO 13766
ISO 10605
Electrical ISO 16750-2
ISO 7637-3
Ingress Protection EN 60529 IP65
ISO 20653 IP6K5
Climatic ISO 16750-4
Mechanical ISO 16750-3
Irradiance ISO 4892-2
Chemical ISO 16750-5
© TTControl GmbH 2020. All rights reserved.
Confidential and Proprietary Information
11
Document Number:
D-156-G-02-001