Installation Instructions

Play music with USB/SD and Bluetooth
This function part allows user play music from inserted USB flash drive or SD card or Bluetooth
or Aux in function. Insert USB flash drive or SD card in appropriate slot or connect your
Bluetooth device.
play previous music
play next music
on play mode: short press to start or pause the playing
Bluetooth control
When the tone arm set to the rest position, Bluetooth function will start automatically. Then
need to press the mode key to circle between USB/SD and BT.
USB/SD encoding system
Insert USB/SD when playing old vinyl, just long press (about 3 seconds) then it starts to
record with GREEN flash light till press the key to stop it.
: Short press to select among USB/SD and recording FILE stored in USB/SD.
: Long press it to delete the current music recorded from outer sound source. On record
mode, press it to stop recording.
Auto Stop
• When a record finishes playing, it can be controlled by the auto-stop ON/OFF switch.
• Lift up the tone arm and put it on the rest when finished.
• Replace the protective cap on the stylus and close the tone arm lock.
• Turn off the power at the mains
CARE AND MAINTENANCE
Replacing The Stylus Cartridge
Refer to figures 1-8