Installation Instructions

Turntable Operation
1. Ensure that the mains voltage of your home corresponds to the operating voltage of the
adapter. Connect the power adapter to the wall outlet. Connect the DC connector to the
“DC IN” jack on the rear of the unit.
2. Place the vinyl record on the big platter gently.
3. Set the correct speed of your vinyl record (33/45/RPM).
For 45 RPM vinyl record, please use the 45RPM adaptor.
4. Turn on the power of the turntable.
5. Move the tonearm to the requested starting point on the record. The turntable will be
running and play is starting now.
6. Adjust speaker volume to the preferred level.
7. Slide the Auto Stop Control switch to choose the out stop.
8. When it going to the end, the TONEARM will stop automatically. You must return the
TONEARM to the Tonearm Rest manually.
Playing via Bluetooth
1. Turn on the record player, this automatically turns the Bluetooth on.
2. Make sure you Bluetooth enabled device (Tablet, Phone, Computer) has the Bluetooth
switch ON. Go to your Bluetooth setting and check for Bluetooth pairing name “TT-4” and
click connect.
3. You should be connected to the record player now and be able to play your music.
Headphone Jack
Plug headphone into the headphone jack to listen to the music. Headphone is not included with
the unit.
Note: When using headphone, the sound from the speaker will be cut off
RCA Audio Out
You can listen to your new turntable using the built-in speakers, or you may wish to connect it
to your existing Hi-Fi system. Connect the “line out” RCA ports to the “line input” on your mixer
or amplifier using an RCA cable (not supplied)
• Red plug into the right channel input
• White plug into left channel input
Play 45rpm Vinyl
Place the 45 rpm ADAPTOER over the spindle. Gently place your 45rpm record onto the
turntable. Follow the steps under Turntable operation to play your record.
USB/SD Control