Brochure
1110
TSUNAMI PRODUCT CATALOG 10
1.800.782.5752
|
TSUNAMI.US.COM
11
Tsunami filters are machined from the highest quality
materials and are anodized inside and out to ensure ultimate
durability against corrosion and trapped contaminates. Our
cutting-edge technology is rigorously tested to outperform
your expectations regardless of the industry or application.
AIR FILTRATION
WATER SEPARATORS
HOW IT WORKS
Air enters the filter & travels down
a small diameter tube causing an
increase in velocity.
The air reaches the bottom of the
inner tube then is redirected 180° up
the outer tube allowing gravity and a
slower velocity to capture bulk liquids.
Velocity increases again as air is forced
through small orifice baffles before
entering the stainless steel mesh
element.
Centrifugal force is used to capture
any remaining liquids before exiting
the filter.
Liquids are automatically ejected
through the drain.
Tsunami water separators and oil coalescing filters are designed to accommodate multiple drain types for specific application needs.
Draining options include float drains, our patented Moisture Minder
®
Electronic Drain and our patent pending pneumatic filter drain.
FILTER DRAIN OPTIONS
MOISTURE MINDER
®
EDV
MOISTURE MINDER
®
FILTER DRAIN
FLOAT DRAIN
A fixed strainer screen
removes contaminates before
reaching the valve orifice.
Requires an intermittent pilot signal
to operate. Designed to spin on
corresponding size filter housing.
Standard with all filters.
Filter heads machined from 6061 Aircraft Aluminum
Oversized tube length allows both gravity and velocity to
assist in the removal of water and air contaminates
Removable bottom cap provides ease of service and
machined drain port provides various drain capabilities
Filter packages can be ordered in reverse flow, right to left, and have a “-R” at the end of the part number
Filtration service parts can be found on pages 18-19 or by searching the unit part number online at tsunami.us.com
1
3
3
2
1
2
-R
1
2
3
4
5
PART
NUMBER
MAX
CFM
DRAIN
TYPE
PORT
SIZE
WEIGHT
DIMENSIONS
(HWD)
21999-0390 20 Float ¼” NPT 1½ lbs 8½” x 2” x 2”
21999-0390-ED 20 Electronic ¼” NPT 2½ lbs 11½” x 2” x 2”
21999-0390-MM 20 Pneumatic ¼” NPT 2 lbs 10½” x 2” x 2”
21999-0131 50 Float ½” NPT 3½ lbs 14½” x 2½” x 2½”
21999-0131-ED 50 Electronic ½” NPT 6 lbs 17½” x 5½” x 4”
21999-0131-MM 50 Pneumatic ½” NPT 6 lbs 17” x 2½” x 2½”
21999-1034 120 Float ¾” NPT 9lbs 16” x 3½” x 3½”
21999-1034-ED 120 Electronic ¾” NPT 9½ lbs 18” x 6” x 4½”
21999-1034-MM 120 Pneumatic ¾” NPT 9lbs 18” x 3½” x 3½”
21999-0082 120 Float 1” NPT 9 lbs 16” x 3½” x 3½”
21999-0082-ED 120 Electronic 1” NPT 9½ lbs 18” x 6” x 4½”
21999-0082-MM 120 Pneumatic 1” NPT 9 lbs 18” x 3½” x 3½”
21999-0850 240 Float 2” NPT 19 lbs 16.5” x 7½” x 3½”
21999-0850-ED 240 Electronic 2” NPT 21 lbs 19” x 10” x 6½”
21999-0850-MM 240 Pneumatic 2” NPT 20 lbs 18½” x 7½” x 3½”
21999-0960 800 Float 3” NPT 38 lbs 35½” x 6” x 6”
21999-0960-ED 800 Electronic 3” NPT 39 lbs 35½” x 6” x 10”
21999-0960-MM 800 Pneumatic 3” NPT 39 lbs 35½” x 6” x 8½”
The Tsunami Water Separator removes
water, up to one quart per minute, and
filters particulate down to 10 micron.
Max Pressure: 250 psi Max Temperature: 175°F
OIL COALESCING FILTERS
ACTIVATED CARBON FILTERS
HOW IT WORKS
HOW IT WORKS
Air enters the filter and passes
through the element from the
outside to the center.
As the air travels through
the activated carbon layers,
oil vapors are captured and
held through the process of
adsorption.
No liquids should be present at
this stage, therefore, there is no
drain.
1
2
3
PART
NUMBER
MAX
CFM
DRAIN
TYPE
PORT
SIZE
WEIGHT
DIMENSIONS
(HWD)
21999-0390-Z-FD 20 Float ¼” NPT 1½ lbs 8½” x 2” x 2”
21999-0390-Z-ED 20 Electronic ¼” NPT 2½ lbs 11½” x 2” x 2”
21999-0390-Z-MM 20 Pneumatic ¼” NPT 2 lbs 10½” x 2” x 2”
21999-0131-Z-FD 50 Float ½” NPT 3½ lbs 14½” x 2½” x 2½”
21999-0131-Z-ED 50 Electronic ½” NPT 4½ lbs 17½” x 5½” x 4”
21999-0131-Z-MM 50 Pneumatic ½” NPT 4 lbs 17” x 2½” x 2½”
21999-1034-Z-FD 120 Float ¾” NPT 5 lbs 16” x 3½” x 3½”
21999-1034-Z-ED 120 Electronic ¾” NPT 6 lbs 18” x 6” x 4½”
21999-1034-Z-MM 120 Pneumatic ¾” NPT 5½ lbs 18” x 3½” x 3½”
21999-0082-Z-FD 120 Float 1” NPT 5 lbs 16” x 3½” x 3½”
21999-0082-Z-ED 120 Electronic 1” NPT 6 lbs 18” x 6” x 4½”
21999-0082-Z-MM 120 Pneumatic 1” NPT 5½ lbs 18” x 3½” x 3½”
21999-0850-Z-FD 240 Float 2” NPT 11½ lbs 16½” x 7½” x 3½”
21999-0850-Z-ED 240 Electronic 2” NPT 13 lbs 19” x 10” x 6½”
21999-0850-Z-MM 240 Pneumatic 2” NPT 12½ lbs 18½” x 7½” x 3½”
PART
NUMBER
MAX
CFM
DRAIN
TYPE
PORT
SIZE
WEIGHT
DIMENSIONS
(HWD)
21999-0390-AC 20 - ¼” NPT 1½ lbs 8” x 2” x 2”
21999-0131-AC 50 - ½” NPT 3½ lbs 14½” x 2½” x 2½”
The Oil Coalescing Filter removes oil
aerosols down to .001 ppm
and particulates down to .01 micron.
The Activated Carbon Filter removes
oil vapor down to .003 ppm, removing
odor and taste from the air.
Max Pressure: 250 psi Max Temperature: 175°F
Max Pressure: 250 psi Max Temperature: 175°F
Air enters the filter and passes
through the element from the
center to the outside.
As the air travels through the
fibrous layers, oil aerosols are
captured and coalesce.
The non-wicking outer drain
layer separates the bulk liquids
from the air flow.
Gravity slows the bulk liquids
to drip into the drain sump
off the filter where they are
automatically removed.
1
2
3
4
FOR THE SURGES ORDINARY FILTERS CAN’T HANDLE