Brochure

98
TSUNAMI PRODUCT CATALOG 8
1.800.782.5752
|
TSUNAMI.US.COM
9
Tsunami Membrane Dryers provide an economical solution for
supplying clean, dry air without the need for electricity. The
molecular makeup of the hollow tubes allows water vapor to
pass. The greater the pressure differential between the inlet
and outlet pressures, the drier the air downstream.
Low relative humidity - down to .01% RH
Great dew point supression - up to 140°F swing
Easy, low-cost maintenance - $160/year
Includes Tsunami Water Separator and Oil Coalescing Filter
pre-filtration with automatic drains
MEMBRANE
DRYER
Includes:
2-Stage Pre-filtration
Outlet Regulator
Max Pressure: 175 psi
Max Temperature: 100°F
PRECISION
MEMBRANE
DRYER
Includes:
3-Stage Pre-filtration
Electronic Drain
Outlet Regulator
Max Pressure: 175 psi
Max Temperature: 100°F
PART NUMBER MAX CFM PORT SIZE WEIGHT DIMENSIONS (HWD)
21999-0889 15 ¼” NPT 9 lbs 22” x 12” x 3½”
21999-0357 20 ½” NPT 16½ lbs 23” x 20” x 4½”
PART NUMBER MAX CFM PORT SIZE WEIGHT DIMENSIONS (HWD)
21999-0957 15 ½” NPT 12 lbs 24½” x 18½” x 5½”
21999-0524 20 ½” NPT 22 lbs 23” x 23½” x 5½”
HOW IT WORKS
The Drying Process
The molecular makeup of the hollow tubes allows certain gases
to pass through the membrane quicker than the desired gas.
As compressed air travels through the hollow tubes, water
vapor passes through the membrane pores.
The water vapor collects within the housing until it is removed.
A fixed orifice at the bottom of the hollow tubes allows dry air
to pass up the housing, around the hollow tubes, to sweep the
water vapor out the sweep holes at the top of the housing.
1
2
3
4
MEMBRANE DRYERS
Dry Air
Wet Air
Inlet
Outlet
Sweep Air
Dryer flow rates based on 100°F at 175 PSI with an outlet pressure of 100 PSI.*
Lower inlet pressure and higher temperatures affect the performance and quality of the downstream air.
Pure systems utilizes a simple timed control valve for cycling & Tsunami pre-filtration to assure removal
of water, oil and particulates before entering the dryer.
The Rove is designed to give your business ultimate mobility. The removable dryer sits
atop a 30-gallon storage tank with wheels. This user-friendly design provides clean, dry air
wherever and whenever you need it.
The Pure-10T is designed as a complete package and is mounted on a 60-gallon storage tank to increase shop
capacity.
PURE REGENERATIVE DRYERS
“THE ROVE” 10HP MOBILE DRYER
PURE SERIES WALL-MOUNTED
PURE SERIES TANK-MOUNTED
Pure Series dryers are available with either float or Moisture Minder
®
pneumatic drains.
WALL-MOUNTED DRYERS
ITEM # SIZE MAX CFM DRAIN PORT SIZE (NPT) WEIGHT DIMENSIONS
21999-1105 5 HP 17 Float ¼” inlet ½” outlet 20 lbs 25" x 17" x 12"
21999-1105-MM 5 HP 17 Pneumatic ¼” inlet ½” outlet 20 lbs 25” x 17 x 12”
21999-1105-T 5HP 17 Float ¼” inlet ¼” outlet 22 lbs 26” x 18” x 12”
21999-1105-T-MM 5HP 17 Pneumatic ¼” inlet ¼” outlet 23 lbs 26” x 18” x 12”
21999-1010 10 HP 40 Float ½” inlet 1” outlet 60 lbs 27” x 21” x 12”
21999-1010-220 10 HP 40 Float ½” inlet 1” outlet 60 lbs 27” x 21” x 12”
21999-1010-MM 10 HP 40 Pneumatic ½” inlet 1” outlet 62 lbs 27” x 21” x 12”
21999-1010-MM-220 10 HP 40 Pneumatic ½” inlet 1” outlet 62 lbs 27” x 21” x 12”
21999-1010
21999-1105
ITEM # POWER MAX CFM PORT SIZE WEIGHT DIMENSIONS
21999-0955 120v 40 ½” NPT 190 lbs 36" x 72" x 24"
21999-0955-220 220v 40 ½” NPT 190 lbs 36” x 72” x 24”
21999-0955-PP Pneumatic Generator 40 ½” NPT 190 lbs 36" x 72” x 24"
TANK-MOUNTED DRYERS
ITEM # POWER MAX CFM PORT SIZE WEIGHT DIMENSIONS
21999-0945 120v 40 ½” NPT 150 lbs 4½" x 2" x 2"
21999-0945-PP Pneumatic Generator 40 ½” NPT 150 lbs 4½” x 2” x 2”
“THE ROVE” MOBILE DRYER
Cut the cord! The Tsunami Rove is now available with pneumatic generator power
supply. Pneumo powered models operate by consuming 1-2 scfm from the dryer.
21999-0945
21999-0955
21999-1105-T
PURE SERIES REGENERATIVE DRYERS INCLUDE:
2-stage Pre-fitration; Water Separator, Oil Coalescing Filter
Regenerative Air Dryer
Solenoid Valve Timer
Automatic Drains
1-Year Warranty on
Tsunami Pure Drying Systems Utilizing
Pneumatic Drains
*minimum inlet pressure 80 PSI