Product Manual

Suburban Manufacturing, Inc. warrants this unit to be free from manufacturing defects for a period of one year from the date the unit is shipped from factory according to the
following terms:
This unit must be installed and maintained in accordance with the manufacturers’ written recommendations and requirements as they exist from time to time.
This unit must be used for appropriate applications.
This unit must not have been altered from its original state.
Any portion of this unit found defective in material or workmanship will be repaired or replaced, at the manufacturers option, without charge for parts or labor, providing the
u
naltered product is returned to the manufacturer, shipped prepaid, within the two year time period set forth in this warranty and provided further that the customer establishes
that the product is defective in its material or workmanship.
This warranty specifically does not apply to:
Any unit which has been altered from its original state by the customer or anyone acting on behalf of the customer other than the manufacturer.
R
epairs necessitated by accident, abuse, or failure to use the product in a manner for which it was designed.
Failure by the customer to follow the normal installation, application and maintenance requirements of the manufacturer.
Loss of use of any system of which this unit is a part, loss of time, inconvenience or any other incidental or consequential damages sustained by the customer.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE THIS REMEDY
OF REPAIR OR REPLACEMENT UNDER THIS WARRANTY IS EXCLUSIVE AND NEITHER THE MANUFACTURER NOR ITS AGENTS AUTHORIZE ANYONE TO ASSUME FOR THEM ANY OTHER OBLICATION OF
ANY FORM OTHER THAN THE OBLICATION TO REPAIR OR REPLACE WHICH IS SET FORTH IN THIS W RITTEN WARRANTY THIS WRITTEN WARRANTY COMPLETELY EXCLUDES THE MANUFACTURERS’
RESPONSIBILITY FOR BUSINESS INTERRUPTIONS, LOSS OF PROFITS, PERSONAL INJURY, COSTS OR DELAY, OR ANY OTHER DIRECT OR INDIRECT INCIDENTAL OR CONSEQUENTIAL LOSSES, COSTS,
OR DAMAGES THE CUSTOMER ACCEPTS THIS WARRANTY AS AN EXPRESS CONDITION OF PURCHASE OF THIS UNIT
Suburban Manufacturing, Inc.
301 Chelsea Road Monticello, MN 55362 USA
Phone: [phone] Fax: [phone]
Alternative Drain Replacement for dirty, oily systems
When float drain failure due to very
dirty and oily systems becomes and
issue, make a switch to using the
Moisture Minder EDV solenoid drain
valve.
Remove float drain, apply thread
sealant to ½” NPT threads on EDV
and install to bottom cap.
P/N 21999-0177
Moisture Minder®
EDV
Electronic Drain Valve
Drain Tube Kit Installation
Once you have mounted the
Tsunami filter or filtration
package, install barbed fitting
onto bottom cap and route
the drain tubing to a desired
discharge and collection
location
Optional Differential Pressure Indicator Installation
When installing the Differential Pressure Indicator (DPI) make
sure the flow direction arrow points in the same direction as
the directional flow arrows on the Tsunami heads.
Remove the plugs on the top of the Tsunami head and install
DPI. Use a coin to reduce the risk of over tightening the bolts.
DO NOT OVER TIGHTEN THE PLASTIC BOLTS OR
YOU WILL BREAK THEM!!
This unit is almost always installed on the Tsunami Oil
Coalescing Filter.