User's Manual

TROUBLESHOOTING GUIDE
9
PROBLEM SOLUTION
Static or buzzing is heard through the
receiver.
Make sure the CHANNEL switch on the transmitter
and the receivers are set to the same channel.
Receiver is out of range of the transmitter. Move
closer.
Transmitter's POWER indicator is not
lit.
Make sure the POWER switch is set to the ON
position.
Make sure the unit is connected to the AC adapter.
Receiver's POWER indicator is not lit. Make sure the Power/Volume control is set to ON.
Make sure the unit is connected to the AC adapter.
If using battery power, make sure batteries are insert-
ed correctly.
You hear sounds other than the ones
from your baby's room.
Change channels as you may be hearing the sounds
from another baby monitor close by or from a cordless
phone using the same frequency.
High-pitch squeal coming from
receiver.
The transmitter and receiver are too close; move away
from each other.
If you experience a problem with this unit, check the chart below before calling
for service.