User's Manual

OPERATION
8
Connect the unit with the AC adapter
and/or insert batteries as shown on
pages 6 & 7. Place the transmitter in
the same room as the child. Point the
microphone toward the crib or play
area. Place the receiver(s) in the room
where you will be or if using batteries,
connect to your belt using the belt clip.
1
Slide the POWER switch on the
transmitter to the ON position; the
POWER indicator will light.
2
Slide the CHANNEL switch on the
transmitter to the 1 or 2 position.
3
Slide the CHANNEL switch on one or
both of the receivers to the 1 or 2
position to match the transmitter’s
setting made in step 3.
4
5
Rotate the Power/VOLUME control on one or both receivers
counterclockwise until a click is heard; the POWER indicator will
light. Then, adjust the volume as desired. When a sound is heard,
the SOUND LEVEL indicators will light (the more lights, the louder
the sound) and the sound will be heard through the speaker(s).
Rotate the Power/VOLUME control clockwise until a click is heard
to turn the unit off; the POWER indicator will turn off.
NOTES:
•
T
o turn of
f the
Transmitter, slide the POWER switch to the OFF
position; the Power indicator on the Transmitter will turn off.
•
See note on the bottom of page 6 if the SOUND LEVEL
indicators do not light.