User's Manual

PREPARATION (CONTINUED)
7
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the
battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and
Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to pre-
vent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat
and rupture. (Follow battery manufacturer’s directions.)
Press and hold the Release button,
then rotate the belt clip
counterclockwise.
1
Slide out the battery compartment in the
direction of the arrow.
2
Insert three (3) AAA size batteries,
following the diagram.
Replace the battery compartment and
rotate the belt clip until it locks in
place.
3
INSTALLING BATTERIES (FOR RECEIVERS)
NOTES:
The BATT LOW indicator will light
when batteries are low and need
replacing.