User Manual

ManualsBrandststicks ManualsOthertsticks GRS Push and Pull Spinner V2

1

2

3

4

5

6

7

8

(For TS-DOT-02 and TS-BSP-02 and above version only)

GRS Spinner Configuration Tool

Instructions for

calibration

Select between X and Y

axis for cursor

movement. Click apply to

save change

Change the spinner

resolution between 360,

720, and 1440 CPI. Click

apply to save change

Change the product ID

displayed at driver level.

Click apply to save

change

Spinner model name and

ﬁrmware version

TS-DOT-02 push &

pull button

calibration. Click

apply to save change

Enable/Disable TS-

DOT-02 push & pull to

function as a

conventional push

button. Enable this

mode to allow the

signal for the "push"

and "pull" buttons used

with the external

encoder board