Phau Ntawv Qhia

2
• Always test the RCD before use. If the test procedure
is not completed satisfactorily or an appliance continues
to trip the RCD seek professional advice and switch off
the appliance.
• To clean use a dry cloth only.
Do NOT use any liquid cleaners.
• The RCD should NOT be used when it could come into
contact with liquids or excessive atmospheric pollution.
• A warming of the casing during use is normal.
• Do NOT use outside the service conditions.
• For devices having a solid neutral, ensure the correct
polarity of the incoming supply connections should the
device trip automatically upon connection to the supply.
3. Wiring Tests – IMPORTANT
• Remove this product from the circuit if carrying out tests
(as described in the IEE Wiring Regulations) for earth
loop impedance, prospective short circuit current
and insulation resistance.
• Use the enclosed wiring label to ensure this is
carried out.