Cov lus qhia

Motion Detection: This function disables the PIR completely, no matter what night mode the device has been set to, the PIR will not turn
on the attached LEDPRO floodlight. When this mode is active the motion detection icon will be orange.
PIR: This function allows you to set the sensitivity level of the PIR as well as the time-out duration for the attached LEDPRO floodlight.
You can also enable or disable different angles of the LEDPROCAM’s PIR. See below for a more detailed indication of this function.
Siren: This function allows you to switch the Siren/Alarm ON/OFF at will to use as a deterrent for any unwanted visitors to your property.
The siren can also be triggered as part of the PIR’s light on time via the device settings menu if required.
Notice the PIR detection can be combined to allow for a full 270º area of detection or as low as a 90º area of detection from the left, right or
centre. You can also enable or disbale the PIR detection areas to suit your installation environment i.e. left and right areas to detect only while
the central area remains disabled.
The PIR sensitivity slider allows for adjustment of the LEDPROCAM’s PIR, this would mean that when set to “high” the PIR would pickup small
movements relativity easily. and when set to “low” the PIR would not pickup as subtle movements in the detection area. Choose the best
selection for your intended use of the product.
The light on time slider simply determines the time-out delay for the attached LEDPRO floodlight, the selection of time-out delays are 30 seconds,
2 minutes, 8 minutes and 15 minutes, these are fixed and cannot be changed. Note that if a subject is still in the detection area, the PIR may
remain on for a longer period then the time-out delay has been set for due to the area still being active with motion.
PIR Section 3 (90º)
Light On Time Slider
30s, 2min, 8min or 15min
PIR Section 1 (90º)
PIR Section 2 (90º)
PIR Sensitivity Slider
Low, Medium or High
67-058-691 Issue 2
T.W April 2022
3 Year Guarantee
In the unlikely event of this product becoming faulty due to defective
material or manufacture within 3 years of the date of purchase, please
return it to your supplier in the fi rst year with proof of purchase and it
will be replaced free of charge. For years 2 and 3 or any diffi culty in
the fi rst year telephone the helpline on 020 8450 0515.