Cov lus qhia

ManualsBrandsTSO TSEG ManualsLEDPROCAMTIMEGUARD LEDPROCAM Wi-Fi Lub Koob Yees Duab PIR

LEDPROCAM TUYASMART USER INTERFACE FUNCTIONS

Playback Mode: This mode enables the user to view all recorded events from the camera (Note an Micro SD card is required for full functionality).

Gallery: Takes the user to the album section of the app to view all captured content stored on the Micro SD card or Cloud storage, device storage can also be used.

Light: This function allows the user to perform manual ON / OFF switching of the attached ﬂoodlight if required, you can also select the “Timing” function to setup a

daily or weekly schedule for the attached ﬂoodlight.

Private Mode: This function puts the camera into a Deep Sleep, this would mean the camera view will be disabled and any additional users who have access to the device

will not be able to view the display.

Night Mode: This function enables the night-vision as well as the photocells affect with the PIR sensor.

When set to “Auto” the camera’s night-vision will automatically be enabled at night after the dusk brightness threshold has settled in. From this point on, when a subject moves

in the PIR’s area of detection, the PIR will trigger the attached LEDPRO ﬂoodlight on for the selected duration time for the time delay. During the daytime when the night-vision is

disabled the PIR will not trigger when a subject walks past the LEDPROCAM.

When set to “ON” the camera’s night-vision will be permanently activated. Because of the nature of this mode the PIR will switch on the LEDPRO ﬂoodlight during both the day

or night regardless of the light levels or install environment. This mode bypasses the photocell to enable the PIR to be in use during the day, unlike when being used in auto mode

where the PIR would trigger only during the night if the light levels are dark enough.

When set to “OFF” the camera’s night-vision will be permanently disabled, this would mean that during the day the camera’s footage will appear normal, however, during the

night the footage will not have night-vision enabled. When this mode is in effect during the PIR will not switch on the LEDPRO ﬂoodlight at any time (day/night).

The Model LEDPROCAM is a Wi-Fi Camera PIR designed for the LEDPRO ﬂoodlight range, this product is only certiﬁed for use with the TuyaSmart app on iOS and Android mobile

operating systems. Timeguard would be unable to support 3rd party integration of this device outside of the guidelines shown on the instruction manual.

Introduction

TuyaSmart User Interface Dashboard

Full Screen

High / Standard Deﬁnition

(Live View Only)

Capture Photo

Talk Function

Playback Function

Gallery

Night Mode

Motion Detection

Minimize / Maximize Menu

Device Settings Menu

Mute / Unmute

Change Video Ratio

(Live View Only)

Capture Video

Private Mode

Light

Siren

PIR

TuyaSmart User Interface Functions

Summary of content (2 pages)

PAGE 1
LEDPROCAM TUYASMART USER INTERFACE FUNCTIONS Introduction The Model LEDPROCAM is a Wi-Fi Camera PIR designed for the LEDPRO floodlight range, this product is only certified for use with the TuyaSmart app on iOS and Android mobile operating systems. Timeguard would be unable to support 3rd party integration of this device outside of the guidelines shown on the instruction manual.
PAGE 2
Motion Detection: This function disables the PIR completely, no matter what night mode the device has been set to, the PIR will not turn on the attached LEDPRO floodlight. When this mode is active the motion detection icon will be orange. PIR: This function allows you to set the sensitivity level of the PIR as well as the time-out duration for the attached LEDPRO floodlight. You can also enable or disable different angles of the LEDPROCAM’s PIR. See below for a more detailed indication of this function.