Phau Ntawv Qhia

7b. Installation (Corner Bracket)

• Mark the position of the mounting holes on the wall using the

corner bracket as a template (See image 3).

Drill the holes ensuring not to infringe with any

gas/water pipes or electrical cables that may be

hidden below the surface.

• Insert the rawl plugs into the holes. If mounted

to an external corner, as shown, there is a thin web of plastic

that needs to be removed with cutters before installation. The

corner bracket can also be used for internal corners (not shown).

• Fix the corner bracket to the wall using the two mounting screws,

making sure it is the correct way up. Take care not to

over-tighten the screws to prevent damage to the corner bracket.

• Pass the mains supply cable through the

back box, using the appropriate knockouts

and cable entry points to prepare

for termination. Ensure the

grommets are used to maintain

the IP rating of the luminaire.

(See Image 4)

• The back box can then be secured to the

corner bracket using the x4 Philips

screws. (See image 5).

• The mains supply cable can now

be terminated. Please refer to

section 8 (Connection Diagram).

Install

Mounting

Screws x4

Pass Through

Mains Supply Cable

Knockout