Phau Ntawv Qhia

7a. Installation

84mm

MOUNTING

SCREW x 2

This section covers installation without the use of the corner

bracket. If the corner bracket is required for installation refer

to section 7b Installation (Corner Bracket).

• Mark the position of the mounting holes on the wall

using the back box as a template (See image 1).

Drill the holes ensuring not to infringe

with any gas/water pipes or electrical

cables that may be hidden below the surface.

• Insert the rawl plugs into the holes.

• Pass the mains supply cables through the back box, using the

appropriate knockouts and cable entry points to prepare for

termination. Ensure the grommets are used to maintain the IP

rating of the luminaire.

• Fix the back box to the wall using the two mounting screws,

making sure it

is the correct

way up. Take care

not to over-tighten the

screws to prevent damage to

the back box. (See Image 2).

• The mains supply cable can now be terminated. Please refer to

section 8 (Connection Diagram).