Product Description

4.2.Network configuration
You need the “Social Distancing Contact Tracing Software”to configure the
Gateway. Please refer to “Software Installation and Deployment Instructions
V1.1”for detailed configuration steps. If you don’t get the software, contact your
system administrator for help. Here is the basic Network knowdege of the
UWB Gateway.
The U3000-t UWB Gateway uses a fixed IP address to access the network and does
not support either the DHCP function, nor the network domain name function.
The default IP of the UWB Gateway is "192.168.1.X" and the network port number
is "48200". The X in IP varies with the ID of the UWB Gateway. You can get the
default IP from the label on the packaging box.
Before modifying the network settings of the UWB Gateway, you should first
modify the IP address of the computer. It is recommended to configure the
·computer's network as:
5.Data Collection
The main purpose of U3000-t UWB Gateway is to collect data from UWB Tags. It
takes about 1 second for each UWB Tag to upload its alarm records. The effective
data collection zone is a circle with a radius of 3m and centered on the
UWB Gateway. Please ensure that UWB Tags stay in the collection zone for more
than 1 second to ensure the collecting process.
During collecting, the alarm function of UWB Tags may be interfered. It will return
to normal when leaving the data collection zone.
The collected data will be uploaded to the designated server, and is only owned
and controlled by the owner of the server.
6.Important safety information for UWB Gateway
WARNING: Failure to follow these safety instructions could result in fire,
electric shock, injury, or damage to UWB Gateway or other property. Read
all the safety information below before using UWB Gateway.
Handling Handle UWB Gateway during transportation, installation and
other cases with care. UWB Gateway contains sensitive electronic
components and can be damaged if dropped, burned, punctured, or crushed.
Repairing Don’t open UWB Gateway and don’t attempt to repair
UWB Gateway yourself. Disassembling UWB Gateway may damage it, and
may cause injury to you. If UWB Gateway is damaged or malfunctions, contact
local distributor for help.
Powering UWB Gateway uses 24VDC / 1A adapter for power supply. Please use
the original adapter or selected adapter that meets the above specifications. It’s
important to keep UWB Gateway and the power adapter installed in a
well-ventilated area. Using a UWB Gateway poweradaptor that’s damaged, using a
third-party selected powering solution which doesn't meet 24VDC/1A or local
IP: 192.168.1.11
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
7 8