Product Description

3.2.Power supply

UWB Gateway has two power supply methods: PoE and DC .

Power over Ethernet Use Cat 5+ network cable to connect PoE switch(which meets

the 802.3af standards) and UWB Gateway. Note that the distance between PoE

switch and UWB Gateway should not exceed 80 meters. This method uses a single

cable to achieve both power and network connection.

DC Power UWB Gateway uses 24VDC/1A adapter for power supply. Please use the

original adapter or selected adapter that meets the above speciﬁcations. At the

same time, use Cat 5+ network cable to connect an ordinary network switch and

the UWB Gateway to achieve network connection.

4. Internet connection of UWB Gateway

4.1.Wired network

There are two main connection methods between the UWB Gateway and the

computer, as shown in Figures 4.1 and 4.2:

Network Cable

4.2 Connection via network switch

4.1 Direct connection via network cable

Power Cable

Server

UWB Gateway Server

Network Cable

UWB Gateway