Product Manual

Page 6
INSTRUCTIONS (CONTINUED)
Fig. 10
Fig. 11
Shove the Demount tab into the rim flange area (see Fig. 10). With your other hand guide the tire beads
into the ‘drop center’ of the rim opposite the side where you’ve placed the Mongoose Tire Tool and
demount tab. Pry up on the Mongoose Tire Tool and demount tab in an arced motion so they rest on the
rim as shown in Fig. 11. With the
tool against the center post rotate them in a circular motion around the
post until the tire is free from the rim. Do this for both tire beads until the tire is completely demounted.
Fig. 12
Fig. 13
Do this to mount both sides of the tire. Upon mounting the tire wipe off the lubricant and clean the tools
and tire.
Loosen the Handle and Threaded Rod Assembly to remove the tire.
Mounting tire
Fig. 12 displays PN 12488 Mount tab with the Mongoose Tire Tool. Place the tire over the rim and
plunge the two tools over the edge of the rim (see Fig. 13) use the Mongoose Tire Tool to pry
against the center post in a circular motion to mount the tire.
USE LUBRICANT AND DON’T PINCH YOUR HANDS OR FINGERS